Setting UP my connection . Please Help ~

[Syamz]

Hi... i have some problems.. please help me.
i want to connect internet use my fedora 8
but its seems cannot connected.

i use hand phone as modem ( Nokia 70 )
use cable dku-5 for connection.
my laptop model is compaq presario v3000

this is the problems :
--------------------------------------------------------------


[root@Trinity etc]# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sun Jul 6 22:18:32 2008
--> Pid of pppd: 3740
--> Using interface ppp0
--> pppd: p�� (��
--> pppd: p�� (��
--> pppd: p�� (��
--> local IP address 10.58.142.137
--> pppd: p�� (��
--> remote IP address 10.6.6.6
--> pppd: p�� (��
--> primary DNS address 202.188.0.133
--> pppd: p�� (��
--> secondary DNS address 202.188.1.5
--> pppd: p�� (��
--> pppd: p�� (��
--> Connect time 1.8 minutes.
--> pppd: p�� (��
--> pppd: p�� (��
--> pppd: p�� (��
--> Disconnecting at Sun Jul 6 22:20:21 2008
--> The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds
--> Cannot open /dev/ttyACM0: No such file or directory
--> Cannot open /dev/ttyACM0: No such file or directory
--> Cannot open /dev/ttyACM0: No such file or directory
--> Disconnecting at Sun Jul 6 22:20:21 2008

--------------------------------------------------------------
this my wvdial.conf

wvdial.conf

[Dialer Defaults]
Modem = /dev/ttyACM0
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = *99#
Username = username
Password = password
Stupid Mode = 1
---------------------------------------------------------------
i try again use wvdial but is show this


[root@Trinity etc]# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
--> Sending: ATQ0
ATQ0
--> Re-Sending: ATZ
ATZ
--> Modem not responding.

-------------------------------------------------------------------


i try use wvdialconf create
but is show this.

[root@Trinity ~]# wvdialconf create
Editing `create'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- ATQ0 V1 E1
ttyACM0<*1>: failed with 2400 baud, next try: 9600 baud
ttyACM0<*1>: ATQ0 V1 E1 -- ATQ0 V1 E1
ttyACM0<*1>: failed with 9600 baud, next try: 115200 baud
ttyACM0<*1>: ATQ0 V1 E1 -- ATQ0 V1 E1
ttyACM0<*1>: and failed too at 115200, giving up.


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
-------------------------------------------------------------------

please help me on this

regards
syamz.