NIC Probleme

[plzza]

i'm still a beginer in linux, fedroa.... so ia have this whit the nic card, i'm tryng to set 4 ip-s on same nic. This thing worked but it started to giv this error and only 1 ip workes.

[root@DG ~]# service network restart
/etc/init.d/network: line 55: /bin/sort: cannot execute binary file
/etc/init.d/network: line 55: /bin/sort: cannot execute binary file
Shutting down loopback interface:                          [  OK  ]
/etc/init.d/network: line 264: /bin/cat: cannot execute binary file
/etc/init.d/network: line 264: [: !=: unary operator expected
/etc/init.d/network: line 55: /bin/sort: cannot execute binary file
Bringing up loopback interface:                            [  OK  ]
[root@DG ~]#

What to do ? Any help?

[scott32746]

Hello,
Look at this webpage

http://www.xenocafe.com/tutorials/li..._nic/index.php

[plzza]

i know how to bind(configure) multiple ip addres i want to know why do i get theat error and why the other ip-adrese's don't start.

[scott32746]

Something must not be correct.

You are going to need to give more info

#ifconfig
# ls /etc/sysconfig/network-scripts/

Double check and see if you all your ifcfg-eth files are -rw-r--r-- root root

[plzza]

Ifconfig

eth0      Link encap:Ethernet  HWaddr 00:1B:FC:96:48:47
          inet addr:195.246.246.85  Bcast:195.246.246.255  Mask:255.255.255.0
          inet6 addr: fe80::21b:fcff:fe96:4847/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:901187 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7765 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:59509869 (56.7 MiB)  TX bytes:799207 (780.4 KiB)
          Interrupt:27 Base address:0x6000

ls /etc/sysconfig/network-scripts/

ifcfg-eth0    ifcfg-lo     ifdown-ippp   ifdown-post    ifdown-tunnel  ifup-eth    ifup-ipx    ifup-post    ifup-tunnel       network-functions
ifcfg-eth0:0  ifdown       ifdown-ipsec  ifdown-ppp     ifup           ifup-ippp   ifup-isdn   ifup-ppp     ifup-wireless     network-functions-ipv6
ifcfg-eth0:1  ifdown-bnep  ifdown-ipv6   ifdown-routes  ifup-aliases   ifup-ipsec  ifup-plip   ifup-routes  init.ipv6-global
ifcfg-eth0:2  ifdown-eth   ifdown-isdn   ifdown-sit     ifup-bnep      ifup-ipv6   ifup-plusb  ifup-sit     net.hotplug

And all all the ifcfg-eth files are -rw-r--r-- root root

[scott32746]

let's look inside one of your ifcfg-ethX:X file


Should look something like
DEVICE=eth1:1
BOOTPROTO=none
IPADDR=195.246.246.XX
NETMASK=255.255.255.0
ONBOOT=yes
NAME=eth1:1

If you have HWADDR= needs to be #ed out or removed.