On board Display of Foxconn P4M800P7MA-RS2 mother board

[hosammy]

May I know that what kind of description fit the display card setting in system-config-display in hardware session of the captioned mother board with on-board display chip. The current setting is "Display Crad: VIA Technologies Inc., Unknow Device 3344"
Copy from the Foxconn web site (http://www.foxconnchannel.com/EN-GB/...d=en-tt0000138). The spec are:
Processor: Intel® Smithfield, Pentium® 4, Celeron D, Socket T (LGA775) processors
Chipset: VIA P4M800 Pro + 8237R Plus
Front Side Bus: 533/800MHz front side bus (FSB)
Memory: Single channel DDR 400 x 2, Single channel DDRII 533 x 2
VGA on Die: Integrated
Expansion Slots: 1 x AGP 8x, 3 x PCI
IDE: ATA133 x 2
Serial ATA(SATA)/RAID: Serial ATA x 2 with RAID 0, 1, JBOD
Audio: 5.1 channel, AC’97 interface, Realtek ALC653
LAN: 10/100M, Realtek RTL8100C (PCI)
IEEE1394: N/A
Back Panel I/O Ports: 1 x PS/2 keyboard
1 x PS/2 mouse
1 x parallel
1 x COM
4 x USB 2.0
1 x RJ45
1 set 5.1 channel Audio jacks (3 jacks)
1 x VGA
Internal I/O Connectors: 2 x USB 2.0 headers, support 4 ports
1 x Intruder
1 x IrDA header
1 x CD IN
1 x speaker header (reserve)
1 x COM2 header
1 x AUX-IN
1 x Front Audio
1 x Front panel
1 x SPDIF out header
1 x Buzzer
BIOS Features: LPC-4Mb, ACPI 1.0b, APM 1.2, PnP 1.0a, SMBIOS 2.3, USB 2.0, WfM 2.0
Support CD: Chipset Drivers, DirectX, RAID Driver, USB 2.0 Driver, Audio Driver, Network Driver, Adobe Reader, SuperUtilities, Norton Internet Security
Standards/Manageability: USB 2.0, WfM 2.0, DMI 2.0, WOL by PME, LPC 1.1 Interface
Special Features: STR (Suspend-to-Ram); STD (Suspend-to-Disk); SuperRecovery, SuperBoot, SuperBIOS-Protect, SuperLevel, SuperStep, SuperLogo, SuperUpdate
Form Factor: Micro ATX (9.6” x 9.6”)

Please advise...

[ronnyromero]

i have the same problem, did you manage to fix it?...im using Fedora Core 6 and I have all the upgrades and fixes, and still the same problem...i mean the computer works fine but the colors and some other this are not normal and its affecting a lot since we have to deal with web pages and it does not look the same on these computers as on another with a different video card or this same computer but using windows.

I have 4 of these motherboards all using FC6