Fedora 10 X64 - Hibernate --> Wake On Lan broken ?

dtushing · #1 6th February 2009, 04:29 AM

Guys,

I've been working on this for a couple of days now and nothing seems to work.

Does ANYONE have Wake On Lan working in Fedora 10 X64 release ?

I found this thread on the kernaltrap.org mailing list which leads me to believe that is may be
broken...
http://kerneltrap.org/mailarchive/li...8/5/17/1855734

Linux genki 2.6.27.12-170.2.5.fc10.x86_64 #1 SMP Wed Jan 21 01:33:24 EST 2009 x86_64 x86_64 x86_64 GNU/Linux

[dtushing@genki ~]$ lspci -tv
-[0000:00]-+-00.0 Intel Corporation 82P965/G965 Memory Controller Hub
+-01.0-[0000:01]----00.0 nVidia Corporation GeForce 9800 GTX
+-1a.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4
+-1a.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5
+-1a.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2
+-1b.0 Intel Corporation 82801H (ICH8 Family) HD Audio Controller
+-1c.0-[0000:02]--
+-1c.3-[0000:03]--+-00.0 JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller
| \-00.1 JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller
+-1c.4-[0000:04]----00.0 Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller
+-1d.0 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1
+-1e.0-[0000:05-08]--+-00.0-[0000:06]--+-04.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| | +-05.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| | +-06.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| | \-07.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| +-01.0-[0000:07]--+-04.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| | +-05.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| | +-06.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| | \-07.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| \-02.0-[0000:08]--+-04.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| +-05.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| +-06.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
| \-07.0 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100
+-1f.0 Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller
+-1f.2 Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller
+-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller
\-1f.5 Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller

[dtushing@genki ~]$ sudo ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pg
Wake-on: g
Current message level: 0x000000ff (255)
Link detected: yes

[dtushing@genki ~]$ cat /proc/acpi/wakeup
Device S-state Status Sysfs node
PCI0 S5 disabled no-bus

ci0000:00
PEX0 S5 disabled pci:0000:00:1c.0
PEX1 S5 disabled
PEX2 S5 disabled
PEX3 S5 disabled pci:0000:00:1c.3
PEX4 S5 disabled pci:0000:00:1c.4
PEX5 S5 disabled
HUB0 S5 disabled pci:0000:00:1e.0
UAR1 S1 disabled pnp:00:07
IGBE S4 disabled
USB0 S1 disabled pci:0000:00:1d.0
USB1 S1 disabled pci:0000:00:1d.1
USB2 S1 disabled pci:0000:00:1d.2
USB3 S1 disabled
US31 S1 disabled pci:0000:00:1a.0
USB4 S1 disabled pci:0000:00:1a.1
USBE S1 disabled pci:0000:00:1d.7
USE2 S1 disabled pci:0000:00:1a.7
AZAL S5 disabled pci:0000:00:1b.0

Thanks in advance for any ideas