Not able to create PPPoE connection

[BinaryBandit]

G'day Folks ,
I have just installed FC11 from a DVD I created from an ISO.
I also have FC10 (using here) and Windoze XP pro all on separate HDDs.
I have not been able to configure my internet connection, when I try to create a new xDSL connection I get an error message; package needed 'rp-pppoe'.
I don't now how to get the package without a connection.
I have tried with and without Network Manager.
Here is some info that may be relevant.

# lspci 
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) 
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02) 
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02) 
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) 
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT] (rev a2) 
02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0) 
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b1) 
05:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 
05:00.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) 
05:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)

# ifconfig 
eth0      Link encap:Ethernet  HWaddr 00:1D:60:36:BB:B3  
          inet6 addr: fe80::21d:60ff:fe36:bbb3/64 Scope:Link 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 
          RX packets:27 errors:0 dropped:0 overruns:0 frame:0 
          TX packets:39 errors:0 dropped:0 overruns:0 carrier:1 
          collisions:0 txqueuelen:1000 
          RX bytes:1652 (1.6 KiB)  TX bytes:4967 (4.8 KiB) 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0 
          inet6 addr: ::1/128 Scope:Host 
          UP LOOPBACK RUNNING  MTU:16436  Metric:1 
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0 
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 
          collisions:0 txqueuelen:0 
          RX bytes:1040 (1.0 KiB)  TX bytes:1040 (1.0 KiB)

Any help will be appreciated, thanks.
The Bandit.

[BinaryBandit]

G'day again Folks.
Well, after many frustrating hours trying to solve my problem, I decided to wipe FC11 using
GParted Live CD, I then re-installed FC11 from my DVD.
The very first thing I did at first log-in was right click the connection icon - edit connections - DSL - Add.
I entered my user name, left the middle line blank then entered my internet pass word and clicked Apply.
I nearly fell off my chair when it connected immediately
The first install must have corrupted a package or something, I have no explanation but I'm happy it works.
Cheers Folks,
The Bandit.

[Villiam]

You are lucky man. Sometimes the simplest solutions are the best. Goodluck

linux