Nvidia XFX 9800 GT Rev 2 Twinn View with 32 inch hdmi 720p and view sonic 19 inch

[Zeguine]

I was wondering if somehone could shed some light on a minor issue with my set-up .

conf as follow

Fedora 12 -x64

display card - XFX 9800 GT rev 2 (Nvidia)

Monitors
View Sonic 19 inch (default)
Soyo 32 inch lcd 720p 1080 i

/etc/X11/xorg.conf file

vidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (mockbuild@builder.wilsonet.com) Sun Nov 22 21:42:15 EST 2009

# Xorg configuration created by livna-config-display

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection


Section "ServerFlags"
Option "AIGLX" "on"
EndSection

Section "InputDevice"
# generated from data in "/etc/sysconfig/keyboard"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "ViewSonic VX924"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 85.0
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9800 GT"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Videocard0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AllowGLXWithComposite" "true"
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
Option "TripleBuffer" "true"
Option "TwinView" "1"
Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection


OK now im going to try to make this as simple as i can. I will firs tell you that i have had similar problem with my winxp box the problem is that the hdmi tv when in 1280x720 (720p) i am missing cutting off like 1/2 inch of the image . Almost like if it would be zoomed in to much . Now the early driver for the win32 box was OK . Since i upgraded the drivers on my winxp box i have had issues (cutting off) i also notice a new option called (resize desktop) and that fixed the problem also notice that the final resolution is 1176x664 instead of 1280x720. The old win drivers did not have that option nether the problem.

So my question is how can i fix this under linux there are no desktoop resize option in the gui driver setting for nvidia . i am unsure if a custom resolution of 1176x664 will fix the issue as i think it may have to do with the H and V sync. Is there a way i can mod my config file to help ?

Thanks

Zeg linux newbee