<---- template headericclude ----->
Fedora 14 ATI Catalyst 10.11 Install
FedoraForum.org - Fedora Support Forums and Community
Page 1 of 2 12 LastLast
Results 1 to 15 of 16
  1. #1
    Join Date
    Dec 2010
    Posts
    5
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Smile Fedora 14 ATI Catalyst 10.11 Install

    Step 1: Open Terminal
    Step 2: Run as root in Terminal

    Code:
    su -
    And enter the root's password.

    Step 3: Update the system
    To make the installation less buggy.

    Code:
    yum update
    Step 4: Install kernel-devel and gcc

    Code:
    yum install kernel-devel gcc
    Step 5: Reboot
    There's two ways to reboot:

    [Main Menu] > [System] > [Shut Down] > [Restart]

    OR

    Code:
    reboot
    Step 6: Download ATI Catalyst driver from official website:

    http://www2.ati.com/drivers/linux/at...x86.x86_64.run

    Step 7: Repeat Step 1 & Step 2

    Step 8: Execute the "ati-driver-installer-10-11-x86.x86_64.run"to install

    Code:
    bash ./ati-driver-installer-10-11-x86.x86_64.run
    Step 9: Move to /lib/modules/fglrx/build_mod

    Code:
    cd /lib/modules/fglrx/build_mod
    Step 10: Compile the driver's module

    Code:
    sh make.sh
    Step 11: Move to the outer directory

    Code:
    cd ..
    Step 12: Install the compiled driver's module
    Code:
    sh make_install.sh
    Step 13: Add nomodeset to kernel row of /boot/grub/grub.conf file

    Step 14: Repeat Step 5

    Step 15: Done!

    NOTE: 3D Acceleration and ATI Catalyst Control Center are available if the installation is success

    Complete Version: http://shnwmchk.blogspot.com/2010/12...1-install.html
    Last edited by Dan; 11th April 2011 at 11:03 PM. Reason: Font sizes reduced to conform to forum standards.

  2. #2
    leigh123linux Guest

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Ok, Can you stop repeatedly posting this guide as I'm getting sick of clearing your posts from the moderation queue.

  3. #3
    Join Date
    Dec 2010
    Posts
    5
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Quote Originally Posted by leigh123linux
    Ok, Can you stop repeatedly posting this guide as I'm getting sick of clearing your posts from the moderation queue.
    Sorry. I stopped. This is the final version.

  4. #4
    leigh123linux Guest

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Quote Originally Posted by shnwmchk
    Sorry. I stopped. This is the final version.
    The auto-moderation should cease when your post count = 6

  5. #5
    Join Date
    Nov 2008
    Location
    Wales
    Posts
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Hi Guys for anyone who is looking on this page atm I could only get the 10.11 to work not the 10.12 but simply follow the instructions as is and it should work but do try the .12 if you can get it to work let me know

  6. #6
    Join Date
    Jan 2008
    Posts
    36
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Quote Originally Posted by gda2004
    Hi Guys for anyone who is looking on this page atm I could only get the 10.11 to work not the 10.12 but simply follow the instructions as is and it should work but do try the .12 if you can get it to work let me know
    The 10.11 and 10.12 ati installer works fine on F14 without any of these steps, Just run the installer choose automatic when it's done type aticonfig --initial then reboot.

  7. #7
    Join Date
    Nov 2008
    Location
    Wales
    Posts
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    how does it work without compiling it ? is that already done inside the installiation wizard ?

  8. #8
    Join Date
    Jan 2008
    Posts
    36
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Quote Originally Posted by gda2004
    how does it work without compiling it ? is that already done inside the installiation wizard ?
    You can either choose to generate a package for your distro if it is listed or select Automatic in the installer which yes compiles the module.

  9. #9
    Join Date
    Dec 2010
    Posts
    5
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Quote Originally Posted by slayerking
    You can either choose to generate a package for your distro if it is listed or select Automatic in the installer which yes compiles the module.
    It didn't compiles the kernel modules automatically even I used the GUI installer. Thus, I showed how to compile the kernel manually.

  10. #10
    Join Date
    Jan 2008
    Posts
    36
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Quote Originally Posted by shnwmchk
    It didn't compiles the kernel modules automatically even I used the GUI installer. Thus, I showed how to compile the kernel manually.
    Well you did something wrong then as that's what it does when you select automatic and always has done. It hasn't worked in earlier versions due to the xorg version being used in fedora but ati usually catches up(usually when the next release of fedora comes out).

    I would say make sure you have the kernel-headers installed too as you only list the devel one there

  11. #11
    Join Date
    Dec 2008
    Posts
    64
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Could any confirm whether FC14 64-bit or the latest ATI Catalyst driver has any issues while installing/configuring this card:

    Sapphire Toxic ATI 5850 - 2GB - DDR5

    Thank you.

  12. #12
    Join Date
    Jan 2007
    Location
    Lawrenceville, Georgia
    Posts
    363
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    do you need to disable compiz 3d effects? I'm currently running the OSS radeon drive with Compiz and Emerald Themes.
    Hey, I was born confused, what's your excuse?!?!?! :D
    AMD Phenom II 965 64 X4, MSI 890FXA-GD70 16 GB (4x4GB) 1600 DDR3 RAM Corsair, Video = AMD HD5770 w/1GB VRAM, SATAIII HDD 1 = 640GB, SATAIII HDD 2 = 1.0TB, SATAII HDD 3 = 1.0TB, SATAIII HDD 4 = 1.0TB, SATA 7 = ASUS DVD/CD, SATA 8 = Panasonic BD/DVD/CD RAM, Corsair HX850W, CoolMaster ATCS840 OS = Fedora 20

  13. #13
    Join Date
    Mar 2010
    Posts
    76
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Well I got CCC installed without much issue, so thanks a lot for the guide/

    However I am now faced with different issues.

    I have an HD5770 with 2 19" monitors hooked up via VGA, and one 47" hooked to my mobo (HD3300) via HDMI. Initially upon install I had the 2 monitors working fine, after installing this driver though I only have the onboard graphics card. I've looked in CCC and it shows my 5770 as an "unknown adapter"

    Does anyone have any suggestions?

  14. #14
    Join Date
    Mar 2011
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    Quote Originally Posted by bulava
    Could any confirm whether FC14 64-bit or the latest ATI Catalyst driver has any issues while installing/configuring this card:

    Sapphire Toxic ATI 5850 - 2GB - DDR5

    Thank you.
    I can confirm this problem. After installing Fedora Core 14 64bit and updating, I immediately installed the ati package. This created an endless loop on boot of black screen attempting to load something after the POST. It seems if you install the ati package before the kernel-devel and gcc packages (after updating) this problem occurs and is fixable by reinstalling (for me since I have no data to lose) or booting into a recovery terminal and removing/installing in the aforementioned order. Hope this helps.

  15. #15
    Join Date
    Dec 2010
    Posts
    94
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Re: Fedora 14 ATI Catalyst 10.11 Install

    do not need so many steps.

    yum install dkms ("Dynamic Kernel Module Support Framework")

    download de binary from ati. e.g: sh ati-driver-installer-11-3-x86.x86_64.run


    some problem in leigth drivers : double image windows, some small issues in the firefox i dont konw why.

    some problems with 32 bit library. with wine . s bit slow , maybe something in the compile options.

    for now I prefer ati drivers
    All fans in the world linux and freebsd.
    who still believe in the philosophy foss

Page 1 of 2 12 LastLast

Similar Threads

  1. ATI Catalyst 9.x fglrx driver manual install on Fedora 11
    By Jeff72 in forum Guides & Solutions (Not For Questions)
    Replies: 25
    Last Post: 30th August 2009, 08:29 PM
  2. How to install ATI Catalyst 9.6 in Fedora 11 (as of Jun 20th)
    By aaccdd in forum Guides & Solutions (Not For Questions)
    Replies: 25
    Last Post: 12th July 2009, 03:14 PM
  3. Replies: 1
    Last Post: 11th January 2009, 07:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
[[template footer(Guest)]]