ZTE WiMAX AX226 USB Modem

[nasimsz]

Can somebody help me in configuring and using ZTE wimax usb modem (AX226) on fedora 15.

Regards

Nasim

[Miikka]

Plug it to your computer and post the output of this here:

dmesg |tail -n 25

[nasimsz]

Executed the command as root:
=======================
[root@nasim ~]# dmesg |tail -n 25
[ 379.308190] sr0: scsi3-mmc drive: 0x/0x xa/form2 tray
[ 379.309506] sr 12:0:0:0: Attached scsi CD-ROM sr0
[ 379.309661] sr 12:0:0:0: Attached scsi generic sg1 type 5
[ 379.429174] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 379.819149] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 380.205175] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 380.608172] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 380.995175] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 381.381154] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 383.109351] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 383.496174] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 385.105152] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 385.491172] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 387.104174] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 387.490172] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 389.104151] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 389.490177] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 391.105175] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 391.491159] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 393.106173] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 393.492171] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 395.105172] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 395.491174] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 397.106173] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[ 397.492173] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[root@nasim ~]#

---------- Post added at 05:29 PM ---------- Previous post was at 05:25 PM ----------



Executed the command as normal user:
=============================
[nasim@nasim ~]$ dmesg |tail -n 25
[ 634.144966] scsi 19:0:0:0: CD-ROM BCM-CD V 01.02 01.01 1.13 PQ: 0 ANSI: 2
[ 634.150623] sr0: scsi3-mmc drive: 0x/0x xa/form2 tray
[ 634.150991] sr 19:0:0:0: Attached scsi CD-ROM sr0
[ 634.151257] sr 19:0:0:0: Attached scsi generic sg1 type 5
[ 634.265153] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 634.657057] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 635.043150] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 635.427117] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 635.812176] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 636.199172] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 636.585159] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 638.106173] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 638.492157] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 640.105175] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 640.491153] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 642.106153] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 642.492027] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 644.104072] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 644.490151] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 646.104153] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 646.490174] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 648.106174] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 648.492177] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 650.106176] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[ 650.492173] usb 1-3: reset high speed USB device using ehci_hcd and address 9
[nasim@nasim ~]$

[Miikka]

Hmm.. the output shows nothing usefull. I also tried googling for "AX226 linux" and it seems your USB modem is rare and no one has been able to get it work properly.

I am unable to help, sorry.